What problems should be paid attention to when making beautiful seams in the living room?

When the beauty stitching is used for the living room construction, it is necessary to explain to the owner clearly the importance of the weather for the living room beauty stitching agent, and the construction should be carried out in a clear time. If the owner’s time does not allow it, then

It is necessary to bring a dryer, or the owner must use air-conditioning and heating to keep the room dry before the beautiful joint construction, and once again confirm whether the tile gaps are completely dry during the construction.

In order to prevent outdoor water vapor from entering the living room, you must not close the doors and windows during construction, and at the same time avoid outdoor dust and impurities from falling on the uncured beauty joint agent. For wet areas such as toilets, check

Whether the inside of the crevice is completely dry, can the beautiful seam be carried out.

Clean up the gaps between tiles in the living room, especially with lime, cement, etc., and make sure to clean them thoroughly to ensure dryness. Then use a high-power vacuum cleaner to absorb the dust. When beating, pay attention to beating at a constant speed, full

Seam-filling agent, pay attention to the degree of fullness during the period, and avoid the thinning of the seam-filling agent, which may not achieve the expected effect after construction.

Beautiful seam agent has anti-fouling and moisture-proof properties, so if there is oil in normal times, just wipe it with a cloth and water in time. The oil that is difficult to clean for a long time can also be wiped with a neutral detergent. Dropped. Ten million

Do not use strong acid and strong alkaline cleaners to clean the seam, otherwise it will cause the seam to react chemically with it, which will cause discoloration of the seam.