What should I do if the tiles are not well seamed? Can it be done again? -Beautiful seam agent factory

Many people don't understand the beautiful seam of ceramic tiles at all. The first beautiful seam did not take many factors into consideration. They just took a look at the introduction graphic or video to implement the beautiful seam for granted, which led to the unsatisfactory effect of the beautiful seam. Therefore, there were countless failures in the first beauty stitching. My friend Mr. Zhang was one of them. The decorating master at his home bought a few bottles of beauty stitching products online and started the beauty stitching directly. The result was very poor, and the painful experience brought Mr. Zhang. A lot of troubles, miserable. Mr. Zhang’s 'Beautiful Seam' product is of poor quality: the product has a hard texture, insufficient toughness, rough and dim color; poor construction details: small seams, unprofessional color matching, antique tiles not waxed or pasted with textured paper, and leftover materials are cleaned The timing is not right...So many owners began to ask sadly, what should I do if the tiles are not well-sealed? Is it just going to be like this? How to cut it out and do it again? Here, Mei Sewing, the Mei Sewing Agent Factory, tells everyone that, in fact, there is no need to worry too much. If Mei Sewing is not done well, it can be removed and done again, but it is more troublesome. Therefore, before you do beautiful sewing, you must make preparations in all aspects to avoid losses caused by secondary rework. Let's talk about the method of removing the beauty seam agent. Method 1: Use a special beautiful seam blade or a utility knife, the blade is sufficiently hard, because the beautiful seam is still relatively hard after the seam is completed, and the adhesion to the tiles is very high. Use a spatula to slowly cut off the original beauty sewing material bit by bit. This method is very laborious, it tests the patience and carefulness of the builders, and pay attention to avoid damage to the tiles! Of course, beautiful seams are not so easy to clean, and many areas are difficult to remove with a spatula. Method 2: Use a hot air gun or a high-power hair dryer to heat the seam glue to melt, and the soft seam glue is easier to clean out, and the price of a hot air gun or a hair dryer is not high, you can prepare it A handful. But be sure to pay attention to high temperatures when using heating tools, be careful of being burned by hot wind, and avoid blowing the heat gun on people. Method three: use the beautiful seam glue cleaning fluid, this method is only suitable for the use of beautiful seam products contaminated on the surface of the tile. Moreover, the beauty joint cleaning fluid is generally corrosive, so please use it with caution. At present, there is no particularly efficient method for removing the beautiful seam of tiles. The combination of the above three methods can remove the poorly effective seam products to a certain extent and lay a solid foundation for the remodeling of new beautiful seams. The process of removing beautiful seams is difficult and troublesome, not to mention the loss of manpower, material resources and financial resources caused by the secondary construction. Therefore, before making beautiful seams, you must carefully understand the matter of beautiful seams, so as to choose excellent seam products and professional seam construction team, and strive to be able to make an exciting seam in one go.
Tile Beauty Seam