What should I do if the tiles leak? -Beautiful seam agent factory

What should I do if the tiles leak? The main reasons and solutions for tile water seepage:

.The main reason is that the tile joints are not filled properly. In this case, you can use the beauty joint agent factory to treat the tile joints. After the repair, there is no change in the surface of the tile, which will not affect the original decoration surface. The material will be completely dry after hours. After getting through, you can grow fish by blocking the floor drain in the bathroom. The amount of water stored on the surface of the tile will no longer seep under the tile. After the beauty joint agent solidifies, it will form a smooth, porcelain-like clean surface on the tile joints, which is wear-resistant, waterproof, oil-proof, non-staining, and has excellent self-cleaning properties. It is not easy to trap dirt and is easy to clean. Its hardness, bonding strength, service life and other aspects are better than the caulking agent (grouting agent), which can completely solve the common problem of dirty and black tile joints and difficult to clean.
.The ceramic tile itself is made of clay, and generally does not decolorize. The back of the ceramic tiles made of clay is red, and the back of the bricks made of porcelain clay is white. You said that if you wash water on the tiles, after a while, you will find that the white tiles are slowly leached by the water and turned into gray. It should be noted that the tiles cannot be cleaned immediately after the tiles are applied. You can find a small hammer to hit the four corners of the tiles on the wall of the bathroom to check whether the tiles are hollow. If there is hollowing, it is very likely that your tile grout is used with toner. There is a problem with the color and the mixing ratio of the cement mortar is caused by a problem. The traditional tile filling method is to use white cement to inlay. Sometimes in order to match the color of the tiles, the decorator will adjust some paint inside. In fact, there are many disadvantages. For example, it will get moldy in the wet season. If you wipe it, you will definitely not be able to clean it thoroughly, and it will not take long for the cement to crack, fall off, and seepage. The crystal enamel glue of Meijiao Factory is a two-component A and B reactive curing adhesive developed by Building Materials Co., Ltd. This product introduces German technology, uses pure imported polymer resin and a reactive copolymerization curing system, and uses a unique Swiss The plastic bottle container is matched with the static mixing nozzle, and is squeezed by the glue gun, so that the A glue and the B glue flow at the same time and are fully mixed and then reacted and cured. After molding, the effect of high hardness and strong adhesion can be achieved. When uncured, the appearance is a colorful, fine and uniform paste, no peculiar smell, and the decorative effect is extremely strong. It is applied to the corners of modern kitchens and bathrooms, the gaps between tiles, and the gaps between tiles in public places such as hotels and hotels.