What wrong way will lead to the seam touch water hazards in the construction process

Beauty is the big fear of construction joints, the sewing products contact with water, mainly from three aspects, the first: the sewing process, the dangers of contact with water. Second: what are the incorrect operation, causes in the process of the construction joints in contact with water, the third: we should be how to guard against.

the seam of the construction process, the joint contact water hazards

the seam after the first seam, maybe this is the idea of common, but the fact is, if the seam construction process in the United States, the joint products has contact with water, beautiful stitch products containing epoxy resin can react with water and seam will cause the product color, these two kinds of beauty in silver and white stitch color inside special obviously, generally white, blond after reaction will become black, bit by bit high black of that kind of, very ugly, and visible, so it is better to not make the United States.

which will lead to the wrong way, the sewing process of contact with water

1, the construction of time is wrong, a word is, tile base is not dry, just worry construction.

the seam teacher usually can avoid these problems, but many seam oneself start work make the United States, more impatient, also did not realize the danger of the sewing products contact with water, so after put the brick, immediately the seam, so wrong, normal, need three to five days time, ceramic tile base will dry.

2, did not notice the local climate

climate is mainly on the air moisture and moisture, indoor temperature in winter or summer high temperature difference is bigger, the wall of the room or the floor will form the water flow to the surface of the beautiful seam an agent, continuous rain throughout the south in winter, the temperature fell sharply. Higher moisture content of air, so in the process of the seam need to pay attention to.

3, artificial factor

ready the seam, the seam an agent is not dry, not careful to sprinkle water on the beauty on the seam an agent, this could lead to a rapid change color, this needs to be off, and when we in decorating a process, will be in the kitchen, toilet, installing a few temporary faucet, for the convenience of a receiving water here is easy to cause negligence, so these errors need to guard against, the need of the construction process carefully.

now big fear of a basic understanding to the sewing process in run into water, we should how to effectively avoid, first of all his human error, the seam construction time, ceramic tile base dry again after the seam, we know there is a, I mainly talk about the weather there is water, how to make a good processing. To prevent because of the weather problem how we should deal with:

to choose a sunny weather in the seam, if time does not allow, construction master with dryer for drying process.

the construction process, to prevent the water vapor enter indoor, outdoor in the construction of avoid by all means must be closed doors and Windows, and at the same time avoid outdoor dust impurities such as land on the beauty of not curing seam an agent. Light is damp areas, such as toilet see if gap inside completely dry, can be in the seam.

after construction also should keep an hour or two airtight doors and Windows.

the sewing process, encounter water the consequences of the seam an agent, what are the wrong way will run into the water, how to do a guard against, made a summary, hope to be able to help you.