Winter the seam construction, we should GET to the point of what?

Accompanied by & other; Years ago, making a room & throughout; “ Throughout New Year check-in &; Concepts such as diffusion, decorate this winter seems to has now become a hot season, and the popularity of the seam, is to let the owners are sew us as a family to decorate an indispensable part. So, how to do the winter seam?

in winter beauty of the subject, so we have a chat, in this season, ceramic caulking gun construction what to pay attention to the point.

it is well known that for the most popular of a two-component ceramic filled seam an agent, the first condition of the construction joints is to ensure that the construction environment of dry and clean. As to why, he is not here to do more to explain. Baidu once, there will be a lot of related articles. So the construction of the environment we are the first to GET to the point of the

about construction environment, the south and the north will also vary, bitterly cold in the north, the south damp.

in the southern city of no collective heating in winter, indoor and outdoor damp phenomenon is more important than the north. The seam under the environment of wet in winter, when construction must pay attention to close the window, and the need to pay attention to the two problems, one is the crack-cleaning carefully observe each cm when clearing the clutter is wet, if there is a wet gap, must use professional high pressure machine ( Hair dryer) Blow dry net; 2 it is remaining material curing cleaning time, need to be flexible to control. The best construction in sunny day.

compared to the south, the north of central heating and floor heating accounts for a certain temperature and humidity of advantage, but to be reckoned with in the north wind. Some owners might think that ventilation is beneficial to the seam under the condition of dry, so at the end of the construction, open a window on & other; Fresh & throughout; 。

but, cooling air in winter, it's easy to let the seam when solidification cracks, seriously affected the beautiful, even will produce the phenomenon such as fall off.

so, small make up recommend before, during and after the seam in the United States will try not to the Windows wide open, so as not to affect the ultimate beauty effect.

in addition, the seam at the end of the construction materials before curing, also to ensure that the materials don't contact with moisture.

about the temperature, the temperature of ceramic filled seam an grout is larger, the influence of uneven material such as mixed, glue is difficult, the problem such as curing time is longer.

a two-component oily materials construction temperature at 10 ℃ - best 25 ℃, average temperature above 10 ℃ can be construction. If the temperature is too low, the glue is not good to play, it is recommended that prior to construction material soaked in hot water heating.

attached correct heating mode:

to container heating around 60 ℃ warm water, the height of the depth of no more than material;

the material rubber mouth down, after the rubber plug up, pay attention to the water don't flooded after the plug;

10 - materials Take out after 15 minutes, dry with a towel rifle after use.

under the condition of low temperature environment, relatively longer curing time, temperature, time is 3 ~ 5 hours more than solidification, dry after 24 hours, winter low temperature, excess stock curing moderately cleaning time should be extended. Generally not more than 48 hours, 48 hours if not cure, it can only be dropped the place without curing shovel redo.

about shovel, clear excess stock, generally speaking, the beauty of qualified sewing products should be able to do a tear up. On the other hand, the full amount of excess stock was the owner can intuitive see most beautiful seam a link in the process of product quality. If to remove excess material is too fragile, to remove both laborious and incomplete, be owner see owner will doubt the seam to the quality of the product, it's not easy sewing teacher explains to the owner. Winter construction is difficult, but to avoid the problems still need to avoid it.

front that beauty sewn products curing time may change with the temperature changes. In general, the beauty of winter construction seam in the second day will be able to fully cure and eliminate more than expected, if long time don't clean up, or rapid temperature change, will have a chance to lead to more brittle, so in a timely manner to deal with excess stock is also a key link. Plus an additional precaution is that the early stage of the construction material of ceramic tile, no matter what is before waxing, wipe out the remaining material that can be more convenient, also reduces the likelihood of remaining material become finely.

shower tile grout sealer tile grout is liked by everyone and is used in every household.

For more information on this topic and others, please visit Kastar Grout. We are among the top manufacturers of tile grout professional grout in China, and we serve big names in tile grout industry. You can rely on us for our high quality . Send your enquiry!

If Kastar Adhesive Co.,Ltd. added selling plans, offered more tile grout, and increased service regions, it would suit the needs of more users.

We afford not only the best product but also the comprehensive service, satisfy the customer's demands.