Xiamen ceramic tile seam filling agent construction maintenance measures

Xiamen ceramic tile seam filling agent construction maintenance measures: 1, the grouting, the average daily uniform temperature should not be lower than 5 ℃, grouting after exposed part should be timely spraying curing agent or covering plastic film, affixed with wet straw bag stays wet. Using plastic mulch, cement grouting material of bare surface should be covered tightly, keep plastic film in the condensate. When ceramic tile caulking water agent on the surface of the inconvenience, but spraying curing agent. 2, grouting materials shall be maintained in the wet state, curing time shall not be less than 7 d. 3, when using fast setting type rapid hardening cement grouting material, curing measures should be executed according to the method of product requirements. 4, winter construction, the project has no special requirements on strength growth, after the grouting exposed part should be timely covering plastic film and heat preservation materials. The initial curing temperature should not be lower than 5 ℃. Water in negative temperature curing condition. 5, after ripping cement grouting material is greater than the difference between the surface temperature and environmental temperature 20 ℃, heat preservation material covered maintenance should be adopted. 6, such as environmental temperature is lower than the minimum temperature cement grouting material requirements or the need to speed up the intensity.