Better Touch Better Business
Contact Sales at Kastar.
Latest products
Common methods of construction price list of Hubei ceramic tile beauty joint agent
by：Kastar
2021-04-06
From the decoration and design of family houses to the adhesion and treatment of ceramic tiles, the beauty joint agent has become a commonly used sealant to serve people's production and life. So what about the beauty joint and how is it applied?
The commonly used method of North America joint construction is the masking paper method. How is the construction done?
1. Tools: glass glue gun, masking paper.
2, leave a gap of 1 mm deep. Before applying the beauty joint agent, clean up the dust and other magazines in the joint with a rag or fine-bristle brush.
3. Paste textured paper on both sides of the seam. The texture paper should be about 0.5mm away from the edge of the gap.
4. Put the beauty joint agent on the glue gun, and drive in evenly along the brick joints.
5. Apply about 1 meter, and immediately spread it evenly with your fingers or a small scraper; when the beauty joint agent is not solidified (approximately 1 meter), remove the textured paper.
Note: Be sure to tear off the masking paper in time after smoothing, as the seam agent in the seam will be uprooted after a long time.
This method is commonly used by decorators and is a more recommended method. Check it after the completion of the construction. If there is any unevenness in the part, just make it up again.
The above is a little bit of advice for the construction process of the beauty joint agent, but in the actual construction process, it should be based on the owner's construction period and time arrangement. For more information about the beauty seam agent, you can log in to the official website of Wuhan Building Materials Co., Ltd. for more consultation!
The commonly used method of North America joint construction is the masking paper method. How is the construction done?
1. Tools: glass glue gun, masking paper.
2, leave a gap of 1 mm deep. Before applying the beauty joint agent, clean up the dust and other magazines in the joint with a rag or fine-bristle brush.
3. Paste textured paper on both sides of the seam. The texture paper should be about 0.5mm away from the edge of the gap.
4. Put the beauty joint agent on the glue gun, and drive in evenly along the brick joints.
5. Apply about 1 meter, and immediately spread it evenly with your fingers or a small scraper; when the beauty joint agent is not solidified (approximately 1 meter), remove the textured paper.
Note: Be sure to tear off the masking paper in time after smoothing, as the seam agent in the seam will be uprooted after a long time.
This method is commonly used by decorators and is a more recommended method. Check it after the completion of the construction. If there is any unevenness in the part, just make it up again.
The above is a little bit of advice for the construction process of the beauty joint agent, but in the actual construction process, it should be based on the owner's construction period and time arrangement. For more information about the beauty seam agent, you can log in to the official website of Wuhan Building Materials Co., Ltd. for more consultation!
Custom message
