Don't look at regret series: the most complete process of beautiful seam construction! -Beautiful seam agent factory

In the past few years, the beauty of ceramic tiles has become more and more popular, and it has become a 'compulsory homework' for the decoration of new houses. Therefore, the work requirements of the beauty seamist are also getting higher and higher, and the process is becoming more and more refined. For beautiful seam construction, which points are the key to pay attention to? First, 'open' means to open the seam. The seam is not opened at will, but is left in the seam when paving. The debris is cleaned out and the gap is 'completely opened'. This process cannot expand or shrink the size of the original gap. In the process of slitting, care should be taken not to damage the tiles. Use professional slitting tools, such as: utility knife, hook knife, slitting cone, etc. 2. After opening the gap, there will be a lot of dirt hidden inside. Even if the cleaning work is done in the early stage, the cleanliness may not meet the standard. In order to ensure the adhesion of the beauty joint to the tiles and the long-term use function in the later stage, it must be comprehensive Clean treatment. Use a high-power vacuum cleaner to vacuum and clean the surface and crevices, and then clean with a damp cloth, avoiding bright water as much as possible. Finally, let the gap dry to a dry state before proceeding with the construction work. 3. Filling ~ It is the filling of the beautifying agent. Generally, the filling depth of ceramic tiles is about millimeters. The first thing to ensure is that the filling of the beautifying agent is sufficient to ensure the bonding and sealing of the tile gaps in the later stage. 4. After pressing the glue, press the seam operation in time, generally within one minute. It should be noted that if it is summer, the glue will solidify very quickly, and the seam treatment should be carried out in time. 5. After the glue is cured, the remaining material on both sides of the gap should be cleaned up in time. After cleaning the remaining material, check whether there are any remaining defects in the glueing and pressing process to ensure that there will be no pollution and damage to the tiles. 6. After the cleaning of the remaining materials is completed, the gaps should be inspected once to ensure that each gap has passed the inspection and the surrounding beautiful seams are beautiful and flawless. Make every step of the detail to prevent more problems in the future. . 7. Sweep When it is determined that each gap can meet the standard, then carry out a final cleaning of the overall construction environment to ensure that the environment is clean and tidy after construction. Of course, the above content is only for construction reference. Because of the differences in the tools used and the habits of the construction personnel during the construction process, there should be special handling methods for special construction conditions. Finally, I will give you a little knowledge of popular science. Since the beauty joint agent will be affected by the temperature in winter, it needs to be preheated before use. I will introduce a traditional heating method to everyone: prepare a slightly deeper bucket and pour it into it. -Warm water in degrees Celsius, then the glue nozzle is facing down, and the back plug of the hose is facing up. Pay attention to the water level not to overflow the back plug of the hose. , Pay attention to the water temperature not to be too high-constant temperature heating between degrees. , The material is soaked-minutes later, take it out and wipe the water stains with a cloth, then you can install the gun for use. Now, the good news for the owners is coming. The Beauty Seam Agent Factory has launched a new heating pack, which can get rid of the traditional and cumbersome heating method, quickly heat up, and provide the owners with maximum convenience.
Construction beautiful seam steps