Essential tips, keep you away from ceramic tile seam filling agent become yellow
Very dignified color is light color, appear clean and tidy.
But the floor tile of caulking, many owners are very upset.
This is because the caulking that light color fastens, caulking t want to use the but again afraid to use color.
On the one hand, the light color fastens caulking is suitable for small pure and fresh and decorate a style, white, champagne gold, shallow gold sentiment is higher in the owners group.
But because of the color of caulking shallow light color fastens, so if ceramic tile has a little black border, on both sides of the gap filling effect will sell at a discount greatly.
In addition, due to the characteristics of epoxy resin, caulking products under direct sunlight for a long time can cause yellowing premature, with light color fastens caulking is more obvious.
Once the yellowing happened, don't know the situation of the owner and the door complaint caulking division.
To sum up, in order to prevent these troubles, caulking division in the recommended color ceramic tile gap filling agent, can try not to use light color fastens caulking.
However, the occurrence of these problems, really is the quality problem of caulking that light color fastens itself?
A yellowing, caulking principle for light color fastens ceramic tile gap filling agent, the ceramic tile caulking occur, yellowing is caulking surface yellowing phenomenon.
But if it is brunet department caulking, caulking surface may not be yellowing, but on the surface of white or transparent.
Product caulking these changes will occur, or advocate material by caulking product -
The influence of epoxy resin.
Such as resin chemicals, epoxy resin under the conditions of purification is colorless transparent.
Yellowing epoxy resin while naturally, but normal yellowing period of dozens of years or even longer.
And if by direct sunlight for a long time, part of trace elements in the air is attached to the higher temperature of the surface of the epoxy resin, will produce a response, increase the yellowing epoxy resin.
In addition, if there is water in the ceramic tile aperture, long wet gap will make epoxy resin gradually eroded by water vapor, moisture evaporate into epoxy resin by outsiders, residual impurities in the water vapor will also stay in the epoxy resin, produce the phenomenon such as white, color changing.
Second, how to solve the yellowing ceramic tile seam filling agent.
Choose ceramic tile gap filling quality qualified product caulking agent yellowing of cycle length, depends on the quality of caulking products of raw materials is qualified.
Caulking when choosing caulking products, should choose as far as possible with qualifications of good product, the brand reputation.
Judging from caulking product appearance, qualified caulking that most products have color full color difference is small, high transparency, epoxy resin is opened only a few glues material odor, etc.
In a stable indoor environment construction caulking products before curing will be fragile, so need caulking careful before solidification.
In rainy damp weather, caulking construction should shut all the Windows and doors, ensure construction environment internal stability.
Formal before construction, should be to determine whether the gap filling area crack was already dry, if there is any unqualified gap should leave the area, again after with aperture of stay dry construction.
To owner caulking maintenance Suggestions after the ceramic tile seam filling agent construction, caulking division should be the owner on the basis of some caulking maintenance knowledge.
Such as caulking construction after three days to move large furniture;
When clean caulking, cannot use the acid alkali cleaner, such as steel ball scrubbing caulking;
If the owner in the place where direct sunlight for a long time, want to use light color caulking products should remind the owner as soon as possible this piece may appear early yellowing phenomenon, the owner can change color or shading curtains in advance.