Introduction of KASTAR MS Polymer Sealant Factory
Five points to pay attention to when buying tiles
by：Kastar
2021-04-06
The price of the ceramic tile market itself is high, and coupled with a variety of promotional methods, consumers can easily buy tiles that are not worthwhile. Then, the editor of the beauty joint agent will explain the following five aspects for everyone to pay attention to when choosing the beauty joint agent ceramic tile.
1. Look at the density, hardness and quality of tiles
It can be beaten, and the sound is clear, indicating that the ceramic tiles have high porcelain density and hardness, and good quality. Knock the floor tile lightly with your hand. If the tile makes a 'puff, puff' sound, it means that its sintering degree is not enough and the texture is inferior. If it makes a slight 'dongdong' sound, its texture will be firmer than the previous one.
2, look at the water absorption rate of tiles
The lower the water absorption rate, the higher the inherent stability of the tile, and the more suitable it is for spaces with high humidity or moisture content, without problems such as dark spots. Place water droplets on the back of the tile, and the tiles that are slowly infiltrated after the water disperses have a high density and are considered top grade.
3. Look at the color of the tiles
You can scratch the glaze of the tile with a hard object. If there are traces, it means that the quality is poor. Check the color of the tiles and see if there are pinholes with the naked eye. The pinholes are easy to accumulate dirt.
4. Look at the flatness of the tiles
The side is straight, easy to spread, and the effect is good. Take out any four tiles from the packing box and place them on a flat ground to compare whether the four tiles are flat and consistent, and whether the tiles are inlaid at the diagonal corners.
Then tap the surface of the tiles with the palm of your hand and listen to the sound: the sound of good tiles is relatively low: the sound of bad tiles is bright and has obvious reverberation. Of course, judging by sound is relative. But the first comparison method should not be underestimated. The biggest difference between domestic and imported tiles lies in the consistency of the specifications of the ceramic tile products.
5. Look at the glazed surface of the brick
The surface of ceramic tiles should be smooth and delicate; high-gloss glazed tiles should be crystal clear and shiny, and matt and semi-matt glazes should be soft and evenly reflective. You can try to scratch the surface of the tile with a hard object. If there is a scratch, it means that the glaze is insufficient. After the surface glaze is polished, the tile surface is easy to contaminate and it is difficult to clean. Second, look at whether the product size is standard. You can use a caliper to measure the diagonal. Irregular tiles will not be in a straight line when paving, causing unsightly. Third, look at the deformation. You can directly observe the product with the naked eye. The product is straight and flat, so that the product is small in deformation, easy to construct, and the tile surface is smooth and beautiful after paving. Four look at the pattern, the color pattern should be delicate and lifelike, without obvious defects such as lack of color, broken lines, and misalignment.
The above is a summary of some important points that need to be paid attention to how to buy ceramic tiles for everyone. I hope it will be helpful to everyone. For more details, you can log in to the official website of Mei Suture for more consultation!
Beautiful seam agent http://www.ldmfj.com
1. Look at the density, hardness and quality of tiles
It can be beaten, and the sound is clear, indicating that the ceramic tiles have high porcelain density and hardness, and good quality. Knock the floor tile lightly with your hand. If the tile makes a 'puff, puff' sound, it means that its sintering degree is not enough and the texture is inferior. If it makes a slight 'dongdong' sound, its texture will be firmer than the previous one.
2, look at the water absorption rate of tiles
The lower the water absorption rate, the higher the inherent stability of the tile, and the more suitable it is for spaces with high humidity or moisture content, without problems such as dark spots. Place water droplets on the back of the tile, and the tiles that are slowly infiltrated after the water disperses have a high density and are considered top grade.
3. Look at the color of the tiles
You can scratch the glaze of the tile with a hard object. If there are traces, it means that the quality is poor. Check the color of the tiles and see if there are pinholes with the naked eye. The pinholes are easy to accumulate dirt.
4. Look at the flatness of the tiles
The side is straight, easy to spread, and the effect is good. Take out any four tiles from the packing box and place them on a flat ground to compare whether the four tiles are flat and consistent, and whether the tiles are inlaid at the diagonal corners.
Then tap the surface of the tiles with the palm of your hand and listen to the sound: the sound of good tiles is relatively low: the sound of bad tiles is bright and has obvious reverberation. Of course, judging by sound is relative. But the first comparison method should not be underestimated. The biggest difference between domestic and imported tiles lies in the consistency of the specifications of the ceramic tile products.
5. Look at the glazed surface of the brick
The surface of ceramic tiles should be smooth and delicate; high-gloss glazed tiles should be crystal clear and shiny, and matt and semi-matt glazes should be soft and evenly reflective. You can try to scratch the surface of the tile with a hard object. If there is a scratch, it means that the glaze is insufficient. After the surface glaze is polished, the tile surface is easy to contaminate and it is difficult to clean. Second, look at whether the product size is standard. You can use a caliper to measure the diagonal. Irregular tiles will not be in a straight line when paving, causing unsightly. Third, look at the deformation. You can directly observe the product with the naked eye. The product is straight and flat, so that the product is small in deformation, easy to construct, and the tile surface is smooth and beautiful after paving. Four look at the pattern, the color pattern should be delicate and lifelike, without obvious defects such as lack of color, broken lines, and misalignment.
The above is a summary of some important points that need to be paid attention to how to buy ceramic tiles for everyone. I hope it will be helpful to everyone. For more details, you can log in to the official website of Mei Suture for more consultation!
Beautiful seam agent http://www.ldmfj.com
Custom message
Related Products
