Grouting and tile adhesive play a vital role in the mosaic tile project. Mosaics are usually used to design walls, floors, splashes, pictures, vases, desktops, etc. Most of the tiles are small, so tiler needs to be grouting perfectly, otherwise the tiles may fall off the surface. You should have your questioner suggest a good one. High quality grouting filling the space between continuous tiles. First, it is important to calculate the amount of grouting required for the project. The amount of grouting mixture depends on the total area of the mosaic tile, the thickness of the tile and the distance between the continuous tiles. Usually, the gap is less than 1/8 \". If more than 1/8 \", then you should buy the grouting material containing sand. Sand prevents grouting between tiles from breaking. The next step is to apply grouting between mosaic tiles. You can prepare the grouting mixture according to the instructions on the grouting flyer. Mix the ingredients in the correct quantity. Your grout should be consistent with the surface of your tile. You can also get professional help when choosing the perfect grouting color and finish. After preparing the mixture, apply it to the space between the mosaic tiles. Disperse the mixture evenly so that it fills the void evenly. Now wipe the extra mud from the surface of the tile. You can wipe it with a soft sponge. Avoid using a rag because it causes scratches on the surface. Clean the excess mud and clean the sponge immediately after each cleaning. Sometimes, the surface of the tile is stained due to the color of the grouting. This is because you are not using the sealant. The porous ceramic tile material will be dyed due to grouting; Therefore, you should seal these mosaic tiles before applying grouting. So take proper precautions and apply the tiles perfectly.