How to apply epoxy beauty joint agent to make your home beautiful! Beautiful seam

How to apply epoxy beauty joint agent to make your home beautiful! Beauty Seam Agent

　　 In the construction process of epoxy beauty joint agent, there are many details that everyone does not pay attention to, so that some defects are left after the decoration is completed. Make preparations for the tools before construction, such as a caulking gun, waste Newspapers and rags. Choose the color of the beauty seam agent: Generally, it is determined by the customer according to their own preferences, or recommended by our company's professionals. According to the color aesthetics and experience, young people prefer the color of the tile seam to have a larger contrast with the tile color, such as black seam matching. Yellow bricks, golden seams and blue bricks, and middle-aged and elderly people prefer smooth colors.

Operation steps of 　　 beautiful seam agent: remove the seam agent discharging nozzle, remove the scraper, use pliers to clamp the head of the discharging opening, then install the discharging nozzle, and cut the discharging nozzle with a paper knife Make a slope angle of about 45o, and cut the slope angle at the tip of the discharge nozzle less than 2mm. If the tile gap is larger than 2mm, cut off slightly.

　　 Construction method: Put the beauty joint agent into the glue gun, slowly and forcefully spread the material evenly in the seam, apply a strip of 2 meters left behind, apply a scraper (board) or fingers to the material in the seam in time Scrape evenly, only 1-3 times at once. The gloss is good. The right angle of the right-angle brick should be thinned. The sloped corner brick can be painted evenly without scraping, and the overflow is cut off with a paper knife according to the steel ruler. , Spilled material treatment: If there is any material overflowing the seam during the leveling process, do not handle it temporarily. After 24 hours of filling and construction, it is easy to remove the spilled material with a paper knife, because the beautiful seam agent affects the surface of the tile. Poor bonding.

　　 After construction: be sure to wait until the surface of the beauty joint agent is slightly dry, generally if it is 12 hours in summer, and 24 hours in winter, spring, and autumn, pay attention to more ventilation during the drying process before eradicating spilled materials, 7 days -10 days Can be basically cured. 24 hours after the ground construction, before the material is dry, do not walk on it, so as to avoid dirtying the ground and contaminating the surface of the beauty joint agent.

The above is a brief introduction to the beautiful seam of ceramic tiles by the editor of Magic Color. For more information about the beautiful seam agent, please visit the official website of Wuhan Building Materials Co., Ltd. for more consultation!