How to check the quality of the beauty joint construction? -Beautiful seam agent factory

The ceramic tiles at home are made of beauty joints. How to check the construction of the beauty joints? How to check the construction quality of beautiful seams? The beauty joint agent construction expert of the beauty joint factory will explain to you, and the construction effect of the beauty joint agent can be judged from the following points:

.Flatness

Use a large leaning ruler to lean on the surface of the tile gap after construction, and the allowable error is within mm.

.Yin and Yang angle square

The overlap direction at the yin and yang corners is correct, use a square ruler to check the yin and yang corners of the beauty suture agent, and the tolerance is within mm.

.Seam straightness

Dense, evenly wide and straight, with a suitable gap at the junction with the wall. The allowable error of the straight line is mm, the allowable error of the width is mm, and the allowable error of the seam is mm.

.Appearance and cleanliness

The surface is clean, without discoloration, efflorescence, and stains. If discoloration occurs, it may be caused by poor quality of the beauty joint agent and poor adhesive strength. If the discoloration is large, it is recommended that the beauty joint agent be applied again.

.Firmness

Insufficient beauty joint material, insufficient brick soaking, and improper treatment at the base level will cause the beauty joint to hollow.