In construction of ceramic tile seam beauty, why bubbles?

Many owners bought after sewing materials, start at home beauty seam. Problems must first make a phone call to customer service, ask why I do the beauty of the seam have bubbles? Small make up today about the tidy beauty seam foaming reason for everyone. 1, base without handle, ceramic tile aperture with moisture before construction must maintain gap of dry, otherwise it will lead to porcelain beauty rub off. At the same time, as the moisture evaporation, can lead to beauty of bubbles. 2, with ash of ceramic tile aperture, not clean the seam, must use a vacuum cleaner to clean ceramic tile aperture, prevent dust pollution, leading to play out the plastic surface is uneven. 3, ceramic tile aperture is too small, the construction speed is fight gum technique have a pause or sizing too fast, glue did not enter inside crack, and on the surface, causing gas underneath, behind the know the inside of the seam pressure when gas cannot eduction, can lead to colloid in bubbles. 4, ceramic tile seam thickness is too thin colloidal construction is too thin, not enough to compaction the internal air, also can easily lead to sizing in blister. 5, ceramic tile seam high heating temperature, leading to a colloid have sparkling winter low temperature, in order to reduce the difficulty of the glue, often used for heating of the porcelain seam beauty. But if too high temperature heating, it will be prone to bubbles. 6, the beauty of beautiful sewing products of poor quality bad sewing products, due to the production process does not pass, the production process, the colloid with a lot of gas, make construction way when bubbling. The above is the basic cause of the seam construction when bubbles, most unprofessional or construction. So let's do the seam in decorating, or want to find the beauty of professional sewing team, use beauty rest assured reliable sewing products.