Professional manufacturer of tile grout and adhesives with 27 years experience.

In so doing, the ceramic tile more beautiful

by:Kastar     2021-01-06
First contact the seam, ceramic tile that is an outfit the master's advice, he said before the ceramic tile aperture to black, do the seam can be very good solution to this problem. However, for the family with larger area, the price is quite expensive, so we're going to find a large area of the master, to build a small area. In order to avoid the construction of the error, we consulted a lot of seafarers' master construction skills. First of all, the American joint construction are four steps: cleaning, gluing, pressing and razed. That sounds simple enough. But the teacher told us that because of certain skills, we also need to pay attention to some problems. We learn from the first step will be taken seriously, otherwise the back of the work is wasted. Clean clearance to remove all dirt and impurities. Our house is the new decoration of ceramic tile, cross buckle also in there, so we need to put it out before cleaning. Some people will fill of the joint sealant, before the construction sealant can be cleaning to 3 mm depth, seam is beautiful. Clean, without water or cleaning at will. Ceramic tile edge must be very clean, dust can cause joint agent off otherwise. Before coating, we need to put the glue in first, at least 30 cm long inside the hose to make glue should come from. At first, we thought we would be a waste, but the teacher said, gel mixing unevenly, if in the crevice, will not set. 30 cm long gel are only a few grams. Compared with a group of 400 ml of beauty sewing agent, really nothing. Don't lose everything. In order to make a sufficient number of sealant entry clearance, glue gun can't move too fast. Looking at glue into the cracks, and then moving at a constant speed. Because most of our ceramic tile is smooth, the master can direct the construction. But when making Angle of Yin and Yang, he will put your mask paper paste on rough surface, easy to paste and pressure, will not stick the mask agent on the ceramic tile is difficult to clean. According to the teacher said that there are a lot of everyday objects can also be used to press. The most common is the ice cream bar. Use the ice cream bar effect is the same as the seam pressure plate, relatively uniform, but the club have radian. Seam pressure, must press a, can not be repeated. When you meet the intersection in all directions of the intersection repair, not to be back at the intersection. Yin and Yang Angle can also use the special clamp, very practical. This should be the most simple steps to shovel the glue. Suture agent completely cured, usable blade, gently tear other stitches can directly with the hand, very enjoy. But the ceramic tile with a mask of paper may be within 10 minutes after pressing off the mask paper, does not need to wait for curing. On the back of the tile is made of our own in accordance with the instruction of the teacher. It looks good. You have learned?
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...