Ensure that the surfaces to be sealed are clean, dry and free from grease.
A preliminary compatibility test is recommended.
The application temperature must be between + 5℃ and +40℃.
Dimensions of the joint:
Minimum width X Minimum depth: 5mm X 5 mm
Recommendation: width = 2 x depthl
The joint must be smoothed with spatula within 5 minutes of application to ensure good contact between the
sealant and the substrate.
The adhesive tape must be used where precise lines of joints or clean lines are required. Remove the tape immediately after applying the product.
An excess of sealant can be removed from tools and surfaces before it cures, using solvent. Once hardened, the material can be removed mechanically.
Joint width | 12mm | 15mm | 20mm | 25mm | 30mm |
Joint Depth | 5mm | 8mm | 10mm | 12mm | 15m |
Joint length / 600 ml | 12 meters |
5 meter | 3 meters | 2 meters | 1.3 meters |
Glass | Degrease with alcohol or MEK |
Aluminium, light alloys and stainless steel | Degrease with alcohol or MEK |
Other Metals | Lightly abrade then degrease as above |
Wood | Lightly abrade surface then remove dust |
Plastics | Degrease using an agent recommended by plastics manufacture |
Concrete and other alkaline Surfaces | Brush and remove dust |
Meets or exceeds the requirements of the following specifications:
The requirements of VOC content specifications in LEED credit EQc4.1
“Low-emitting products” of SCAQMD rule 1168.
The French VOC requirements for class A+
CE marked for EN 15651 for façade applications.
It must not be used in totally confined spaces where sealant cannot cure
due to lack of atmospheric moisture.
Multi-Seal can be applied to a variety of substrates directly. If not sure, we recommend a preliminary
compatibility test.
They should be protected from water, frost and adverse air conditions.
They should be kept dry and cool on wooden pallets at between +5 degree C and +25 degree C in moisture free conditions.
The opened products should be consumed immediately.
Shelf life is maximum 12 months conditional to complying with the aforementioned storage conditions.
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.
Chemical Base | MS Polymer Based |
Curing Mechanism | Moisture Curing |
Color | White/Black/Grey |
Density | 1.60±0.05 gr/ml |
Tack Free Time ≤ 1h | 10 - 20 min ≤1h（23±2℃，50±5%RH） |
Construction work time | 10 mins |
Cured depth (24hours) | ＞3.5mm |
Tensile Strength | ＞1.2 MPa |
Elongation at break | ≥150% |
100% Tensile Modulus | ＞0.6MPa |
Shore A Hardness | About 35-45 |
UV resistant | No change. |
Shirkage | ≤ 1.5% |
Service Temperature | -50°C to +90°C |
Application Temperature | +5°C to +35° |
Shelf life | 12 months |
*Curing condition of the sample :23℃×50%RH×14 days
Product Type | Volume | Package |
White,Grey,Black | 300ml | 2 |
White,Grey,Black | 600ml | 20 |
DESCRIPTION
Multi-Seal is a universal grade, general purpose all-weather adhesive sealant based on Modified Silane polymer. Combines the properties of both silicone and the polyurethane that makes it an optimum choice for a variety of substrates including: Aluminum, Granite, Ceramics, Marble, Porcelain, Metals, PVC,Glass, Wood, Porous Surfaces (Concrete, Brick, Limestone, etc.).
FEATURES & BENEFITS
Does not contain solvent, silicone or isocyanate,Very Low VOC content,No bubble formation, even in wet and humid conditions,Very good UV resistance Over-paintable with water based paints, No shrinkage,Does not cause oil stains in panels and porous material, Non-sag, very easy to apply,No surface tackiness
APPLICATION AREAS
Sealing and Bonding applications in;
Window and Door Perimeter
General sealing and waterproofing
Roofing and gutter
Concrete joints
Metal building construction
HVAC
STORAGE AND SHELF LIFE
They should be protected from water, frost and adverse air conditions.
They should be kept dry and cool on wooden pallets at between +5 degree C and +25 degree C in moisture free conditions.
The opened products should be consumed immediately.
Shelf life is maximum 12 months conditional to complying with the aforementioned storage conditions.
Product Specification
| Chemical Base | Modified Silane Polymer |
| Curing Mechanism | Moisture Curing |
| Color | White/Black/Grey |
| Density | 1.5±0.1 gr/ml |
| Tack Free Time | 10-15 min (23°C and %50 R.H.) |
| Curing rate | 90±10 min. (23°Cand %50 R.H.) |
| Tensile Strength | ≥2.3MPa |
| Elongation at break | ≥350% |
| 100% Tensile Modulus | ≥1.5MPa |
| Shore A Hardness | 50A |
| Press Ratio | ＞350ml/min |
| Liquidity | ＜1mm |
| Application Temperature | +5°C to +35°C |
| *Curing condition of the sample :23℃×50%RH× 14 days |
Packing Specification
| Product Type | Volume | Package |
| White,Grey,Black | 300ml | 24 |
| White,Grey,Black | 600ml | 12 |
