Polyurea beauty joint agent construction methods and precautions-beauty joint agent factory

As a new high-tech material, polyurea is one of the new materials known in the world with better weather resistance. At present, it is mainly used in special scenes with high requirements such as medical treatment, chemical industry, military industry, aerospace, ships and containers. It is used in the beautifying agent, combining the original high wear resistance, high hardness, and high bonding strength of polyurea, and the flexibility and weather resistance of the polyurethane beautifying agent. It is UV resistant, does not contain harmful substances such as nonylphenol, dodecylphenol, formaldehyde, benzene, solvent-free, odorless, halogen-free and acid-free. The beautiful seam agent factory Youpin Polyurea Seam is a more environmentally friendly seam agent on the market, and it is used indoors and outdoors. It not only inherits the waterproof and mildewproof characteristics of epoxy beauty seam agent, but also has the characteristics of UV resistance and no discoloration. It is truly universal indoors and outdoors, ensuring that it does not lose its luster and color throughout the year. The operation method of polyurea beautifying agent The operation method of polyurea beautifying agent is the same as that of traditional epoxy beautifying agent. , Clean the crevices of the tiles, apply wax or masking paper on the edges of the tiles. , Open the bottle cap and screw on the matching glue stick. , Install a special glue gun, and the bottle mouth should be fixed at the glue gun position. , Discard the unmixed materials about cm. , The material is fully and evenly driven into the tile gap. , Use the seam tool to flatten the beauty seam agent. , After curing, remove the excess beautifying agent on the edge of the tile. Precautions for polyurea beauty joints The curing speed of polyurea beauty joints is very fast, so under normal circumstances, it is recommended that two people apply, one glue and the other pressure joint, so as to effectively prevent the curing speed from causing the polyurea beauty joint to be cured without pressure joints The question is, if there is only one person, one glue is divided into three times. Because polyurea has a very strong adhesive force, it is recommended that no matter what kind of brick surface should be waxed, it must be waxed or pasted with masking paper. Surface drying time of polyurea seam: -minutes. Time to clean up remaining material: minutes. Best performance. Thorough curing time: summer hours, winter hours
Beauty joint agent Construction method Matters needing attention Polyurea