Steps for the corner construction of the beauty joint

) For newly-applied tiles, fill the gaps between the corners and the joints with a caulking agent, and then wipe off the excess caulking at the corners and the joints (the width of the joints should be at least mm, depth-mm, antique Brick width mm, depth-mm), the gap must be clean and flat. ) Use a utility knife to shovel the tile joints for old tiles with at least mm in width and depth-mm, antique tiles in width mm and depth-mm, and the gaps must be clean and flat. I have always emphasized the treatment of the cracks during construction, because it is directly related to the effect displayed after construction. ) Put a beautiful joint between the corner and the brick gap, use your finger to draw a line with an arc and a moderate size of the wall gap, and then rub it with sea time. The sponge should not be too wet. Consistent, the effect produced in this way is three-dimensional. ) When making beautiful seams on the wall, the principle of top-down, horizontal first and then tight is generally adopted. Finally, the construction of the beauty joint is completed. In fact, the use of the beauty joint is very simple and the cleaning effect is also very good. It is definitely the best helper for your home cleaning.

Beauty joint agent construction steps corner