Teach you how to use beauty joints correctly-beauty joints factory

Beauty grout Factory Beauty Grout Factory teaches you the correct use of Beauty Grout Factory Beauty Grout Tile Seam Width and Narrow Reservation Planning Usually the tile joints are reserved mm-mm wide, mm-mm deep, and narrow tile joints after filling the joints The overall effect is good, the three-dimensional effect is good after the tile gap is wide, the layering is strong, and it is easy to control the scale and the error is small. Set aside the tile joints, you can use the positioning cross to embed in the tile joints. Simply make sure that the width of the bricks are the same. Then use cement or white cement to fill the joints. After filling, use willows to compact the joints to keep the depth of the joints. -.mm is appropriate. In the drying period, after the paving and caulking is completed, the cement in the joint can be completely dried before the joint construction of the beautifying agent can be carried out, and the dust in the ceramic tile can be removed with a rag. Pre-preparation of the beauty sewing glue gun, pressing ball, beauty sewing scraper, beauty sewing blade, waste newspaper (used to wipe the nozzle head of the beauty sewing gun), rag (or sponge) to choose the color of the beauty sewing agent factory , Usually it is decided by the customer according to their own preferences, or recommended by our company's professionals. According to color aesthetics and experience, young people prefer the color of brick seams to contrast with the colors of the beauty seam factory, such as black seams with yellow bricks and golden seams with blue bricks, while middle-aged and elderly people prefer smooth colors. Unscrew the cap of the beautifier bottle, then install the mixing rod, and use a paper knife to cut the mixed rod to an angle of left and right. The tile seam is smaller than mm and the tip of the discharge nozzle is cut out. The angle is sufficient, and the tile gap can be slightly cut off if the tile gap is larger than mm. Construction method: Put the beauty joint agent into the glue gun, squeeze out the unevenly mixed part of the material at the front, slowly and forcefully apply the beauty joint agent evenly in the seam, apply it-the left side of the meter, use a scraper or press the seam The ball will evenly scrape the material in the seam in time. The yin and yang corners of the tiles can be smoothed gently with a yin and yang corner scraper. Spilled material treatment: If there is any material overflowing the seam during the leveling process, it does not need to be cleaned up, but can be removed with a Meiseing blade after curing.

Beauty Seam Agent Beauty Seam Agent Factory