The beauty seam just made is flat, what is the matter that it collapses and becomes uneven after it dries the next day? -Beautiful seam agent factory

Yesterday, I received a request from a netizen for help, saying that the beauty suture that I just made was flat, but what happened the next day when it dries and collapses? The editor has learned some beautiful seam construction skills from several professional seamstresses, and I will share with you below. There are many possibilities for the collapse and unevenness of the beauty joint agent. , The quality of the beautifier is not good. The viscosity of the poorer beautifier is not enough. After being hit in the tile gap, it will sink under the influence of gravity, and even shrink and crack. If air is mixed in the product, bubbles, bulging, etc. will also occur. , There are impurities in the gaps of the tiles. Before the construction, the gaps between the tiles must be cleaned up, because it is inevitable that cement mortar will seep into the gaps of the tiles when laying the tiles. If it is not cleaned up, it will cause unevenness after the application of the beauty joint agent. , Gluing method is wrong. The correct construction method is that the glue gun and the tiles are at a degree, so that the beautifying agent can be fully filled into the gaps of the tiles to avoid collapse. If the glue is too thin, bubbles, bulging or collapse are prone to occur. So how to avoid this situation? , To purchase high-quality beauty seam products, you must perform the exhaust operation before construction, that is, unscrew the cap, push the piston with a glue gun until the two pipes are glued at the same time, and then follow the standard beauty seam construction process. , Carefully clean the tile gaps before the beautiful joint construction to ensure that the gaps are clean and dry. , If the tile gap is deep, you can use a caulking agent to pave the bottom, leaving the millimeter depth for the construction of the beauty joint agent. , The glue should not be applied too fast during construction, and the beauty joint agent should be fully filled into the gaps of the tiles. Pay attention to check whether there are bubbles when pressing the seam and remedy it in time. Beautiful joint construction is a project that requires care and patience, so you must learn more and practice more before operation. I hope that the seamstresses will take every customer seriously, so that customer satisfaction will have a bigger market.

Beauty joint agent Beauty joint construction bubble collapse uneven