The birth of beauty joint agent and the development history of beauty joint agent-beauty joint agent factory

Mei Sutures originated from China and have been developing for more than years. In the early days, the gaps between ceramic tiles were filled with grout, so-called white cement mortar, with a single color. Over time, the gaps between the ceramic tiles will become moldy, blackened, and fall off, which will affect the appearance and threaten the health of the family. Later, according to the needs of the market, colored caulking agents appeared, and colored pigments were added on the basis of white cement, so that the caulking agent is no longer a single white, but the problems of moldy, blackening, and shedding are still not solved. The single-tube and single-component beauty seam agent was born. The raw materials are processed from polymer materials and pigments, and the shape is like glass glue. The advantages are rich colors, convenient use, smooth surface and low cost. Due to the inherent characteristics of the raw materials, the shortcomings are also obvious. After curing, there will be shrinkage and collapse, which can only be used for table filling but not full filling. The adhesion is poor, the texture is slightly soft, and it is not resistant to abrasion. It cannot be used in areas frequently contacted with water, such as toilets and kitchens. In 2005, the first real beauty seam agent on the market, a two-component pre-mixed epoxy resin beauty seam agent, appeared. At this time, the beauty joint agent needs a professional beauty joint master to adjust and fill in the tile gaps. Theoretically, it solves the problem of moldy and blackening of the tile gaps. However, the construction method is more complicated. If the beauty joint master is not skilled, it will appear later. Discoloration, falling off and other problems. Nianmei seam agent has been upgraded again, and a single-tube two-component seam agent has been developed, which reduces the mixing process, and uses a special glue gun to save time and effort in construction. The two-tube two-component beauty sealant 'Crystal Porcelain King' was born in Nianmei Seam Agent Factory, which has more capacity, more colors and stronger shrinkage resistance than single-tube two-component beauty sealant. It can be used whether it is a newly installed tile joint or a tile joint that has been used for many years. Prevent the gaps from turning black and dirty, affecting the appearance of the room, and preventing the growth of mold and harm human health. The product is specially added with negative ions, which can effectively remove formaldehyde, benzene and other decoration pollutants, continuously purify the air, and protect the health of the family. Crystal Porcelain King can play a very good role in protecting ceramic tiles. After being applied to the gaps of the tiles, the beauty joint agent can well absorb the deformation caused by the thermal expansion and contraction between the substrate and the masonry, and extend the service life of the decorative surface. ; It can also prevent cracks in building materials products, and significantly improve the impermeability. After the seam agent is solidified, a smooth porcelain-like clean surface will be formed on the joints of the tiles. It is not only wear-resistant, waterproof, but also oil-resistant, non-staining, and has excellent self-cleaning properties. Completely solve the ubiquitous problem of dirty and black tile joints and difficult to clean.
Beauty Seam Agent Beauty Seam Agent Factory Development History