The floor heating is turned on three days in advance in winter. The room with floor heating is more suitable for beautiful seams.

After the winter, home decoration has entered the final stage, and the construction of beauty joints ushered in a wave of peak season. The weather in the north is cold, and many families have floor heating. So the question is, can a room with floor heating be used for beautiful tiles? This problem not only troubles the owners who are renovating, but also troubles the master sewing master. Below, the technicians of the beauty seam agent factory will answer for everyone why the room with floor heating is more suitable for beauty seams, and why the floor heating should be turned on in advance. , Let the tile gaps be completely dry. In winter, the weather is cold and the dampness sinks, causing the tile gaps to be damp. Even if the weather is clear, the brick gaps will dry slowly. If the drying is not complete, the beauty grout will appear drumming, discoloration, and no drying Wait for the situation. Close the doors and windows and turn on the floor heating three days before the beauty joint construction, which can heat the ground and accelerate the drying of the cracks. The beauty joint agent produced in this way has the best effect. , The room temperature is comfortable, and the construction is easier. In cold weather, the seam agent becomes viscous, and the curing time is also prolonged. The room with the floor heating is turned on in advance, the room temperature is much higher than that of the room without the floor heating. The beauty joint material can be used normally without additional heating in the room, and the construction of the beauty joint master will become much easier. , Accelerate the curing time of the beauty joint agent The curing time of the beauty joint agent is related to the ambient temperature, and the curing time of the beauty joint agent is the shortest at the room temperature, and the effect of color and gloss is better, and the strength and toughness are also the best. To make beautiful joints in a room with floor heating, you need to pay attention to the following:, the brick joints ensure that the three-millimeter tile gap is at least millimeters, not only the beautiful joints made are more beautiful, but the floor heating can effectively prevent the tiles and the beautifying agent from cracking. , Open at least one day in advance to warm the floor and make beautiful seams at low temperatures. Various situations will occur. Difficult to beat materials, partial dryness, air bubbles, bulging, discoloration, etc. are common problems that can occur when making beautiful seams in winter. Turning on the floor heating in advance to allow the ambient temperature and humidity to reach a balance can effectively avoid the above situation.
Beautiful seam winter floor heating