The tiles are dirty and black? The master stitcher teaches you to solve the problem by hand

The tiles are dirty and black? The master stitcher will teach you to solve the problem by hand!

　 As one of the home improvement products that we touch most in our daily life, ceramic tiles may cause various problems during use, including the most common problem of blackening of the gaps between tiles. These tile gaps hide dirt and are not easy to clean, which poses a hidden danger to the family's physical and mental health. As an upgraded product of joint sealant, it is very effective to solve such problems. In the domestic decoration industry, this product is a high-tech product, and it is widely used in building materials, hotels, hospitals, and Home decoration, as well as other decoration aspects, through the joint filling after decoration, the decoration effect achieved by many people agrees. Today I will teach you how to fill the gaps in tiles with beauty grouts.

Before construction, you need to prepare glue gun, sponge, water scraper (or sponge), splicing board, utility knife, towel and basin.

The first step is to clean the gaps between the tiles that have been laid. First horizontally and then vertically, use a utility knife to clean out the 0.8mm grooves until the edges of the tiles are exposed on both sides of the grooves. Clean the gaps with a dry cloth to keep them free of dust. No looseness, pay special attention to the cross. Then paste the textured paper, it is recommended to be about 0.5-1mm away from the gap, and trim the cross of the textured paper to keep it tidy and free of burrs.

　　 Step 2: Knock down the bottom end of the beauty joint 5-6 times, pull the tab, open the glue gun, install the glue head up to the glue gun, install the glue nozzle and exhaust air, follow the gap Cut the glue nozzle obliquely at 45°. First, punch out a 20-50cm beautifying agent, which can be caught with a carton, so don't use it.

　　 Part 3: Formal construction. Punch the beautifying agent into the gap and smooth it evenly with a water scraper, sponge or fingers. After wiping them off, tear off the masking paper, wipe off the overflowing beautifying agent with a slightly damp sponge, and wait for it to solidify.

Compared with the sealant, the beauty seam agent has fine luster, rich color and good decoration. Moreover, the surface of the beauty joint agent is very smooth after solidification, which can be scrubbed together with the tiles, is waterproof, stain-resistant, wear-resistant, and has excellent practicability.

　When choosing tile beauty joint agent for decoration joint filling, first of all, we must first understand these aspects and concretely, so that we can know how to construct? And during construction, we also know how to clean up the residual beauty joint agent, so as to decorate Only by coming out of the house can I be more satisfied. For more information about the beauty seam agent, you can log in to the official website of Wuhan Building Materials Co., Ltd. for more consultation!