Two-component beauty joint construction process-beauty joint factory

Construction process of two-component beautifying agent: Two-component beautifying agent is liquid.
Construction method: First, remove a groove from the tile joint, and use a vacuum cleaner to clean the dust in the groove. Take the seam porcelain and curing agent according to the proportion and mix them evenly, pour it into a plastic bottle, and use the plastic bottle to pour the seam agent into the groove. It can be full, concave or convex. A flat groove is recommended, which is easy It is clean, does not leave dust, and is beautiful. After the seam porcelain agent dries, it has high hardness, hard as stone and smooth as porcelain.
) High-performance seam porcelain has high hardness, thick protective layer, strong and durable.
One-component ordinary beautifying agent has low hardness and thin protective layer, and it will be easily damaged if it takes a long time to wipe.
) Two-component beautifying agent curing will not shrink.
When the ordinary beauty joint agent is just finished, the surface is smooth, and after drying, the shrinkage is large, the collapse is obvious, and the flatness is reduced.
) When the two-component beautifier tile joint width is mm-mm, the joint can be directly filled.
For -mm wide tile joints, you can directly use the joint porcelain agent to fill the joints, which saves the construction of the joint agent and the concave surface treatment, and the protective layer is thick. Ordinary one-component beauty joint agent, when the tile joint width is more than .mm, you need a joint agent as the bottom layer to apply.　
) High-performance joint porcelain can also be applied when the bottom layer has a joint filler
) Two-component beautifying agent, which can replace part of the edge sealing function of glass glue.
It can be used to seal the marbles of bathtubs, hand basins and kitchens, and use glass glue to seal the edges. It will turn yellow and black and break soon afterwards. Use two-component beauty joint agent to seal the edges, which is durable. Just wipe it clean.
High-quality beautiful seams must not only be as bright as porcelain, but must be as hard as stone, and high-strength beautiful seams that can be flush with the brick surface can achieve the effect of permanent non-dirty black and high-quality artistic beautiful seams!