Types of packaging and methods of use of beauty joints-beauty joints factory

Packaging types and methods of use


The method of use is also different for different packaging of beautifying agents. There are two types of beauty suture agents on the market: professional special preparation bottle canned beauty suture agent, bagged beauty suture agent, and barreled beauty suture agent.



.Professional special preparation bottle canned beautifying agent



Tools needed for the construction of the beauty seam agent: rubber gloves, sponge, paper knife, glue gun



How to use: Use a paper knife to remove the dirt on the tiles and clean it with a brush. Use an awl to open the can of beautifying agent, install the plastic head with the opening, install the glue gun, and directly Put the grout into the joints of the tiles, wipe it evenly with your fingers immediately after punching, wipe the beautifying grout on the tiles with a wet sponge, and wait for it to dry.



Compared with the two kinds of packaging beauty sutures, the beauty suture factory is packaged in a bottle, which is convenient to use and eliminates the steps of artificial ointment. Bring great convenience to users.



.Bag-packed beautifying agent, barreled beautifying agent



Tools needed for construction: putty knife, mixing bucket, soft rubber bottom spatula, sponge ball



How to use: When using, after the seam is stuck firmly, clean the seam first, free of debris and stagnant water, add clean water to the seam agent according to the ratio of powder to water: Paste-like, let it stand for a few minutes and then stir again to use. Use a bottom ash spoon to squeeze the mixed beautifying agent into the reserved joint along the diagonal of the tile, and compact it with a rubber putty knife. After the beautifying agent is initially cured, use a slightly damp sponge to press the tile Clean up the excess beautifying agent on the surface. After hours, use a dry cloth for further cleaning; the cured color tile beautifying agent is waterproof.



The use of bagged products is more manual. It is more inconvenient to use manually to make a paste and manually fill in the joints.