What about the seam an agent construction method

Believe that most people are wanted to do the seam to ceramic tile, but expensive construction turned off a lot of people. Actually the seam can be diy, novice small white also can make like the seam master effect, but before that, we need to know the construction method of seam an agent. The seam an agent construction method is simple, mainly divided into three steps, adhesive glue, seam pressure and a shovel, but before do this there is a very important step, it is clear. As long as the gap is clean, beautiful seam an agent at the back of the operation to run smoothly. A crack, cleaning a gap that sounds simple enough, is actually has the certain difficulty. The filling in the gaps can use clean seam cone, with a brush or a vacuum cleaner to the inside of the dust out. But gap on both sides must clean up, and a certain depth and width, in general, gap width need to be more than 1 mm, about 3 mm in depth. As a result, gap is clean up good, during the construction period, and ensure that the drying of aperture. Second, the beauty of the glue bottle seam an agent need glue guns out of rubber, will the seam an agent is installed on the glue guns, yank glue gun, and then move at a constant speed, let beautiful stitch evenly into the gap. Here to note, however, the beauty of each group of newly opened seam an agent on the hose, the front end at the end of every type of 40 cm off without glue. Because the beauty of these without mixing seam an agent is not cured, even into the gap will not cure. And before the glue, encounter rough surface of ceramic tile, and affix crepe paper in advance. Three, pressure seam sewing need in finished glue, 10 minutes after they have been doing this in order to make the seam an agent to precipitate into the gap, avoid seam pressure when take away a lot of colloid. Seam pressure need to use the same kind of tools, dynamics, the effects that such pressure to level off is smooth. Four rubber, plastic shovel shovel there are two ways, one is with the ceramic tile of crepe paper, need in seam pressure after 15 minutes will be torn off crepe paper, don't wait until the seam an agent curing. One is smooth on the surface of ceramic tile, the ceramic tile seam or played the wax, need to wait for the seam an agent curing totally shovel glue. With a shovel knife scooping up the seam an agent, then the seam an agent tear in your hands. Is to share the content of the above, I hope to be of help.