What are the points to pay attention to in the construction of Hubei's joints?

What should be paid attention to in the construction of Hubei Beimei joint agent?

　　Does it feel simple? If you think so, you are very wrong. Applying beauty joints is a meticulous work. What I want to say below is the key point. Only by doing these precautions, can you DIY tiles yourself? Gap. Let's follow the editor to find out!

　　Tools used:

　　Glue gun, sponge, nozzle, utility knife, scraper, finger cots 　　　　　　　 method/step

　　 1. Prepare the following tools and wear finger cots before construction to avoid staining your fingers.

　　2. Use a utility knife or brush to clean up the dirt in the crevice. (It must be cleaned up, otherwise it will affect the service life of the beauty joint agent.)

　　3. Install the beauty joint agent on the glue gun.

　　4. Hold down the glue gun and hit the beauty joint agent. (The glue gun is at 45° to the ground, try to hit evenly.)

　　 5. Use a scraper to evenly scrape the beautifying agent.

　　7. Use a sponge to clean up the excess beautifying agent.

　　 Note:

　　 1. Do not poke the ceramic tile with beautifying agent with sharp objects, and it should not be exposed to strong acid and alkali, otherwise it will damage the tile beautifying agent.

　　2, the place where the hollow drum is empty can't be used with beauty stitching agent. Because the ceramic tile will be deformed when stepping on it, it will exceed the tensile force of the beauty joint agent, and the hollow place of the beauty joint agent will fall off after a long time.

　　3. The best construction time for the beauty joint. The beauty joint construction is generally before the furniture is imported, so it is not used to move the furniture back, and it will not cause damage to the beauty joint due to the construction. The construction requirements of the beauty joint are relatively high, and the tile gaps must not have dust, water, oil stains and other impurities during construction. , This will affect the effect of using beauty joint agent.

　　4. The beautifying agent needs a filling agent for the bottom, and the smoother the beautifying agent, the better the effect.

　　5. The beauty joint agent is quick-drying. Use a wet sponge to wipe the overflowing joint agent at a maximum of 1250px at a time, otherwise it will stick to the edge of the tile and cannot be removed, even if it hangs at that time There will also be a small amount of residue, which will turn black when people step on it with their feet. Not only does it not achieve the effect of the beautifying agent, it will only be worse than the original.

　　【Wuhan Building Materials Co., Ltd.】Dedicated to the production and development of beauty joints, the wholesale of beauty joints, and the sale of beauty joints. Quality assurance, factory direct sales! Consulting Tel: 400-658-9501 Log in to our website www.ldmfj.com for more product information.