Better Touch Better Business
Contact Sales at Kastar.
Latest products
What should I do if the foaming agent does not dry after application?
by：Kastar
2021-04-06
The surface blisters or does not dry for a long time after the application of the beauty joint agent. What should be the most effective way to deal with this situation? First of all, don’t worry, you have to judge whether the cause is product quality or self-construction. If it is the former, you can find a business for theory, if it is the latter, you need to clean it out and re-sew it.
Causes of Foaming in Beauty Seam Agent
If there is a small area of u200bu200bblistering after construction, then you need to check whether the tiles are not cleaned, because if they are not cleaned, the joints of the bricks can clearly see some protrusions after construction.
If it is a large area of u200bu200bblistering, there are two reasons: 1. Apply by yourself when the beauty joint agent is not completely dry and contact water (breaking the balance) or let the beauty joint agent be exposed to air for a long time before construction; 2 .The product quality is too poor, and the black-hearted merchants use inferior materials.
There is no reason for the dryness of the beauty joint
The drying and curing of beauty joints requires natural conditions. Normally, the room temperature is kept at 20~35℃ to achieve the best drying effect. Long-term exposure to air below this temperature may cause no drying or insufficient drying.
Contact with water, poor product quality, etc. will cause the phenomenon of failure to dry. If there are any technical errors in your own construction, you can be sure that it is the cause of the business. It is recommended that you take photos as evidence.
Ending: After knowing the reason, it is recommended to clean up the joints of the bricks immediately (because the foaming and non-drying materials must have changed, even after the repair, the use time will not be too long), and then re-purchase or use the beauty of the merchant to reissue The joint agent is processed again.
Causes of Foaming in Beauty Seam Agent
If there is a small area of u200bu200bblistering after construction, then you need to check whether the tiles are not cleaned, because if they are not cleaned, the joints of the bricks can clearly see some protrusions after construction.
If it is a large area of u200bu200bblistering, there are two reasons: 1. Apply by yourself when the beauty joint agent is not completely dry and contact water (breaking the balance) or let the beauty joint agent be exposed to air for a long time before construction; 2 .The product quality is too poor, and the black-hearted merchants use inferior materials.
There is no reason for the dryness of the beauty joint
The drying and curing of beauty joints requires natural conditions. Normally, the room temperature is kept at 20~35℃ to achieve the best drying effect. Long-term exposure to air below this temperature may cause no drying or insufficient drying.
Contact with water, poor product quality, etc. will cause the phenomenon of failure to dry. If there are any technical errors in your own construction, you can be sure that it is the cause of the business. It is recommended that you take photos as evidence.
Ending: After knowing the reason, it is recommended to clean up the joints of the bricks immediately (because the foaming and non-drying materials must have changed, even after the repair, the use time will not be too long), and then re-purchase or use the beauty of the merchant to reissue The joint agent is processed again.
Custom message
