What should I do if there is water in the bathroom?

1. How to check if there is water in the bathroom before sewing?

1. First of all, you need to see where the water comes from. If it is water splashed from the hand basin or bathtub, there is no problem. Just wipe it with a dry cloth. If the dry cloth is repeatedly wiped several times, there is still water. Consider whether there is water leakage, check all the water pipe joints, if there is leakage outside, replace it with a pad or another piece. If it is a concealed water pipe, it will be troublesome. Later, the bathroom floor will be made beautiful. At the time, be sure to wait until the water in the bathroom is dry.

2. What should I do if the bathroom has been stitched?

1. The discoloration of the beautiful seam material is irreversible when exposed to water. You can only scrape it and do it again. If it is always wet, you can choose to use frosted nano-ceramic mud. This material can be applied with water and will not change color.

3. What are the reasons for the frequent discoloration of beautiful seams in the bathroom?

(1) The environmental humidity is too high.

(2) Water is mixed in the construction surface, container, crevice and beauty joint agent.

(3) The moisture contained in the bottom sealant has not been removed.

(4) Use poor beautifying agent because it turns white due to transparency problems.

Solutions:

(1) Dry treatment before construction

(2) Do not apply when the humidity is high

(3) The construction surface should be clean and free from moisture.

(4) Dry the water in the gaps between the bottom tiles.

(5) Choose high-quality beauty seam products.