What should I pay attention to when decorating in spring? -Beautiful seam agent factory

What should I pay attention to when decorating in spring?



、Pay attention to moisturizing wood



The effect of spring decoration on wood is manifested in two aspects: temperature and humidity. Too low or too high temperature will cause adverse reactions of wood, curling and even cracking. After the wood is transported into the decoration site, the industry should pay attention to supervising the construction and avoid placing it in a ventilated place, otherwise the internal moisture will be quickly lost due to air drying, and the surface will be cracked. It is best to put a basin of water indoors to promote its natural evaporation.



、Pay attention to keep warm during construction



In spring, the temperature is high and sometimes low. If the working surfaces such as plastering, scraping putty, and tiling tiles are frozen, problems such as hollow drums will occur. Therefore, regardless of whether it is a bricklayer mixing mortar or an oiler spraying paint, it is best not to work in the open air, and to work in accordance with the temperature in the product description. Especially oil workers should pay more attention to keep warm, open doors and windows to ventilate after they are fully dried, and be careful not to let sand particles fall on the dry paint surface.



Pay attention to the purchase of ceramic tiles



First of all, pay attention to the water content of the tiles. Products with a smooth and delicate surface, crystal luster, and soft back feel are products with appropriate water content. Secondly, pay attention to the difference between ceramic tiles and porcelain. The porcelain tiles with low water absorption, fine structure, and crisp and pleasant percussive sound are porcelain tiles with low water absorption, and those with high water absorption, many structural holes and dull and muddy percussive sounds are ceramic tiles with high water absorption. In spring, when the temperature difference between day and night is large, porcelain tiles with low water absorption should be used.



, woodworking products seal oil in time



The water content of the wood thread used for edge trimming is higher than that of the veneer. After the wood thread is processed, the surface should be sealed with oil as soon as possible, otherwise it will shrink and affect the appearance of the veneer. Therefore, the wood used on the construction site cannot be stored in the open air. After entering the construction site, it should not be placed near the air outlet or the heater. After the production is completed, the workers should be reminded in time to complete the oil sealing as soon as possible to prevent water volatilization and play a protective role in the later stage.





, brick joints should also be carefully maintained



There are also maintenance problems when the tiles are laid and the joints are finished. The smaller the joints of the bricks, the more attention should be paid to the maintenance. The maintenance is generally carried out the next day after the bricks are laid, and the joints of the bricks are lightly wiped with a clean wet towel to keep the joints moist. Due to the small amount of joints contained in the small brick joints, and the maintenance is not in place or timely, it is very easy to break the jointing agent of the floor tiles, the jointing agent of the wall, and even the phenomenon of chalking.



、Ventilation windows should not be too large



When finishing the decoration and ventilating, pay attention to the north-south windows should not be opened too large, otherwise the wind will be strong and the convection will be strong. Due to the different internal moisture content of the ceiling, wood and wall, the internal and external change rates are not consistent. It will cause cracks in some projects. It is a very common mistake to crack the roof and walls due to rapid ventilation. Therefore, when opening windows for ventilation, do not open the windows too much, and at the same time ensure that the indoor temperature is maintained within a proper range.