Which is better, beauty joint agent and real porcelain glue? -Beautiful seam agent factory

Which is better, beauty joint agent and real porcelain glue? Beauty grout is an upgraded product of grout. It is refined from a variety of high molecular polymers and high-grade pigments. It is used to fill the gaps in tiles. It is beautiful and strong and waterproof, and has the same appearance as sealants. Its advantages and disadvantages are mainly: the beauty joint agent is simple in construction and cheap, but it is not suitable for kitchens, bathrooms and other places that are often exposed to water.

Real porcelain glue (crystal porcelain glue), crystal porcelain glue is complicated in construction, high in price, but high in hardness, and has a wide range of applications.



1. One-component beautifying agent: It is currently the most common single-tube beautifying agent. After many years of promotion in the market, it has been familiar to consumers and used in large quantities. The advantages are that it is easy to use, rich in color, cheap, longer than white cement and caulking agent, and has a smooth surface. The disadvantage is that the shrinkage and collapse is obvious after curing, which will form an obvious 'v'-shaped groove. It can only be used for table filling but not full filling, and it cannot be used in areas that are often exposed to water such as bathrooms and kitchens. Because this kind of seam agent is water-based, it is not easy to construct in winter when the temperature is lower than °C, and it must be kept warm, otherwise the water agent will be frozen and deteriorated.



2. Double-tube real porcelain glue: The principle of the double-tube is to use a double-tube glue gun to squeeze out the component A and component B from the two side-by-side The two components are mixed uniformly to react and solidify. The double-barreled glue gun and materials are very heavy, and long-term construction will be very tiring. The crystal enamel glue of Meijiao Factory is a two-component A and B reactive curing adhesive developed by Building Materials Co., Ltd. This product introduces German technology, adopts pure imported polymer resin and a reactive copolymerization curing system, and adopts a unique Swiss The plastic bottle container is matched with the static mixing nozzle and squeezed by the glue gun, so that the A glue and the B glue flow at the same time and are fully mixed and then reacted and solidified to form. After molding, the effect of high hardness and strong adhesion can be achieved. When uncured, the appearance is a colorful, fine and uniform paste, no peculiar smell, and the decorative effect is extremely strong. It is applied to the corners of modern kitchens and bathrooms, the gaps between tiles, and the gaps between tiles in public places such as hotels and hotels. Make tile joints, wash basins, toilets and other gaps lasting bright and clean, and enhance the artistic sense to the extreme, extend the use time, and have a once-and-for-all effect.