Why is the glue leaking when the rubber bottle bursts during the construction process? -Beautiful seam agent factory

Recently, many friends have been paying attention to a problem that the glue bottle of Crystal Porcelain King is leaking. The editor of the Meisew Factory of the Beauty Sealant Factory also tells everyone, why does Crystal Porcelain King leak the glue? What effect does it have to prevent glue leakage? Why does Crystal Porcelain King leak glue? The problem of the viscosity of the curing agent raw material of the glue itself: This problem still exists in a small area, because not all products are perfect, and there will always be a small part of it with certain defects. , Plastic bottles with crystal porcelain glue and booster piston problems: This kind of problem occupies% of the possibility of leaking glue, especially in the cold weather in the north. The booster piston heats up and shrinks, which will cause the booster piston and There are tiny gaps in the wall of the tube. In addition, the hot water before construction in the north in winter overheated the material for too long, which deformed the booster piston, resulting in the leakage of the crystal porcelain glue due to the influence of resistance during the glue. , Construction problems: At present, there are many cases of glue leakage during the construction of electric glue guns, and there are few manual glue guns. Because of the electric glue gun, during the glue dispensing process, the speed pressure is high, and the booster piston is stressed seriously, which causes excessive pressure to cause glue leakage. Therefore, when using an electric glue gun, you must set the glue output gear of the gun body according to the specific engineering quantity, and apply glue evenly. Don't blindly pursue speed and ignore the capacity of the glue bottle. What is the impact of Crystal King's glue leakage? The construction personnel should pay special attention: if the crystal porcelain glue leaks, it will cause the color of the glue to change, such as uneven color and darkening of the color. At the same time, curing will be slow or not curing at all. Once the glue leak occurs, stop the construction immediately, change the material, clean the gun and push the rod as soon as possible to avoid contaminating the gun body and damaging the life of the glue gun! The construction area where the glue leaks should be marked, and the glue should be refilled with new glue to avoid local uncuring. How does Crystal Porcelain King avoid the problem of glue leakage? , Be sure to make the Jingciwang booster piston force evenly. Especially the current popular electric glue gun. The thrust is stronger. When using, do not adjust the propulsion speed to the highest level, which will affect the gun and the tube wall. , There will be precursors when there is glue leakage, which is generally manifested as a change in the color of the glue. Material flows out after the bottle. Once this happens, please stop the gun in time to check and replace with new materials. , Once there is a leak of glue, please stop the construction in time and contact your business manager, explain the situation and analyze the reasons, and hurry up to rectify the construction site.
Construction beautiful seam leaking glue