On March 3rd, Mr Du purchased the seven pcs of golden Kastar tile grout from Kater adhesive factory. On the morning of March 8th, he sent the construction experience and the beautiful effect pictures to Kastar customer service.
Feedback from Mr Du
Doing the gap filling&sealing by your-self need some energy,I spent one night and one day, it is recommended to invite workers if you dont have enogh time. I used a 1 m clip, and the tile joint size left was 1.5 millimeters. I think the tile gaps should not be too wide, otherwise it would grab the limelight of the floor and couldn't tell the difference between the primary and secondary. The tile gap filling&decorating is to set off the floor.
Let's talk about the beauty of the seams, first clean up, use the utility knife to scrape, the slag that is dry on the side is as loose as possible, then use the vacuum cleaner can suck out, and secondly, stick the masking tape on both sides, the seller gives the beautiful There was not enogh, and I replaced it with scotch tape. I went and found that the floor was glued, so be sure to use masking tape!
Finally, for squeezing the tile grout out. It is especially important to remember where the cross. The key is here. Of course, the tile grout needed is also the most, and more! After the squeezing is finished, quickly scrape off the masking tape according to the video. It must be done by two or more people. Otherwise, it is really too tired and too busy! Also need to wear gloves and cloths for working, dont ask me why, you will know it!
